Consolidated Camera Tweaks - CAB

[davidk]

NOTE: CAB UPDATED- DISABLE SHUTTER SOUNDS SHOULD BE FIXED
This cab contains the tweaks to remove the camera delay (from focused to taking the photo), enabling sport and burst modes, allowing for 7.2mp panoramic photos and disabling the shutter sound. I am working on the last part (automatically setting the brightness to -2) but this is a good start if anyone is up for testing it. If anyone knows how to cab a multistring binary please PM me otherwise I'm on a search for new software
These are the value changes:
-HKLM\Software\HTC\Camera\CaptparamCapKeyDelayTime" value="0" datatype="integer

CaptureTimer" value="0" datatype="integer

EnableCapKeyDelay" value="0" datatype="integer

DisableShutterSound" value="0" datatype="integer

HKLM\Software\HTC\Camera\P6


Enable" value="1" datatype="integer

HKLM\Software\HTC\Camera\P8


Enable" value="1" datatype="integer
HKLM\Software\HTC\Camera\P3



MainCamCaptSize" value="1024" datatype="integer

MainCamSupportCaptSize" value="1744" datatype="integer

[trancer]

Thanks for posting

will install tonight on EnergyRom 2.0

[trancer]

Installed, then soft reset.. i still hear the shutter sound though.
registry value was 0
any clues?

[davidk]

Originally Posted by trancer

Installed, then soft reset.. i still hear the shutter sound though.
registry value was 0
any clues?

Yeah - I know what did it. I will change it on the next version but you can change that manually in the camera settings. Did you notice that the two shooting options apepared and there was no longer a delay between the camera focusing and the picture being taken?

[davidusr]

I didnt use the cab, (guess i like doing things the hard way) but i manually changed everything. worked great!. Also, you can now zoom while at max resolution. Nice work!!

[smis]

any update on the next version?

[davidk]

Originally Posted by smis

any update on the next version?

I may have to ditch the ability to have 'brightness' preset as it doesn't seem to work...if I can't figure it out tonight then I'll provide a new cab that gets rid of the click sound and brightness will jsut have to be manual.

[frosty911]

if I wanted to revert tback to the original settings, I just edit the strings you have highled in red right, in the regestry??

[davidk]

Originally Posted by frosty911

if I wanted to revert tback to the original settings, I just edit the strings you have highled in red right, in the regestry??

editing the numbers would do it but I presume uninstalling the cab will undo it anyway. By reverting back you would go back to a 3 second lag between focusing and capturing the picture, low resolution panarama photos and less shooting options so I doubt you'll need to revert

[davidk]

i fixed the camer sound reg so it should be ok now. Sorry about that.